Aluminum extruded fin tubes for radiators,Finned tube heat exchangers are often used in power plants as an exhaust gas heat exchanger to increase the efficiency factor. Further applications in power plants are the preheating of combustion air as well as the condensation of exhaust steam from steam or ORC turbines.
In industrial dryers finned tube heat exchangers will be used for heating of air by hot water, steam or thermal oil in large quantities.
We usually assemble heat exchangers according to customers drawings and requirements.
To better serve for you, it is better to send us datasheets in details.
Finned Tube Heat Exchangers/Radiators consist of a shell & finned tubes assembly. Fins are used to increase the effective surface area of heat exchanger tubing. Finned tubes are used when the heat transfer coefficient on the outside of the tubes is appreciably lower than that on the inside; as in heat transfer from a liquid to a gas, vapor to a gas, such as steam to air heat exchanger, thermic fluid to air heat exchanger. When an extended surface is needed on only one fluid side (such as in a gas to liquid exchanger) or when the operating pressure needs to be contained on one fluid side, a finned tube heat exchanger may be selected.
Applications of finned tube heat exchangers include Steam air heater / steam radiator, Thermic fluid air heater / thermic fluid radiator, Hot water air heater / hot water radiator, Air heater for fluid bed dryers, Air heater for spray dryers, Air heater for flash dryers and Air heater for dryers. These are manufactured using high grade carbon steel, stainless steel, copper, brass and aluminum. Our Finned Tube Heat exchangers are designed to meet the specific duty condition, temperature and pressure of the fluids.
Links to Lord Fin Tube: