Shanghai T.S. Industrial Co.,Ltd/T.S. Industrial Corporation Limited focuse on varies finned tube and close work with heat exchanger and boiler industrial manufacturer. Main products as Extruded finned tube and Welded finned tube; Solid finned tube and Serrated finned tube; Embedded finned tube Kl finned tube, LL finned tube and L foot finned tube; Bimetal finned tube and Single metal finned tube; Elliptical Fin Tube, High fin tube and Low fin tube; H finned tube and Doule H finned tube; Studded Pipe; Twisted tubeLongitudinal Finned Tubes, Brown Fintube and Corrugated tube; Laser welded stainless fin tubeHigh flux tube, heat exchanger tube sheet and heat exchanger Baffles.

Production of various finned tubes, spiral finned tubes, SA179 carbon steel finned tubes, 304 stainless steel finned tubes, 316 stainless steel finned tubes, large diameter finned tubes, alloy steel finned tubes, Serrated finned tubes, ND steel finned tubes, 2205 duplex stainless steel finned tubes, high-frequency welding spiral finned tubes, U bend finned tubes etc

With advanced high frequency resistance welding finned tube production line, annual production capacity of up to 4000 tons. The specifications finned tube produce from OD 16-273mm according to national standards or customer requirements standard. The company produces finned tubes (square fin tube, circular finned tube, spiral fin tube, H type finned tube, longitudinal fin tube, corrugated fin tube, spiral serrated fin tube, needle shaped fin tube, plate shaped fin tube, inner fin tube) can be applied to the boiler, air preheater etc.

  • Large Diameter Finned Pipe|ASTM A312 TP316 Finned Pipe

  • Perforated L-foot Finned Tubes

  • Laser Welded Fin Tube|Laser Welded Stainless Finned Tube

  • Rectangular Finned Tubes, Double H Fin Tubes

  • Lord Fin Tube-ASTM A234 WP5 Elbow


    What is ASTM A234 WP5 Elbow? The ASTM A234 WP5 elbow specification consists of wrought carbon steel and alloy steel in seamless and welded form.The ASTM A234 WP5 Pipe elbows are widely used in pressure vessel fabrication.

  • Lord Fin Tube-ASTM A182 F5 Flange


    What is ASTM A182 F5 Flange? The ASTM A182 F5 Flange is constructed of chromium molybdenum steel. It is lightweight and has a high rupture resistance.

  • What is the difference between pipe bends and elbows?


    What is the difference between pipe bends and elbows? Bends and elbows are fittings used to change the direction of a pipe, but the performance of pipe bends and elbows are different, and elbows are used much more than pipe bends.