NEWS CENTER LOCATION:HOME > NEWS CENTER > NEWS > Lord Fin Tube--Finned Tubes and Bends

Lord Fin Tube--Finned Tubes and Bends

Finned Tubes and Bends

74 off FINNED TUBE 51 OD x 3.2WT EN10216-2-16Mo3/ASTM A240-409 in accordance with attached drawing A008768-Z001 A

74 off FINNED TUBE 51 OD x 3.2WT EN10216-2-16Mo3/ASTM A36 in accordance with attached drawing A008768-Z001 A

37 off RETURN END OUTER BEND 51 OD x 3.2WT EN10216-2-16Mo3 in accordance with attached drawing A008768-Z002 A

37 off RETURN END INNER BEND 51 OD x 3.2WT EN10216-2-16Mo3 in accordance with attached drawing A008768-Z002 A

74 off HEADER INNER BEND 51 OD x 3.2WT EN10216-2-16Mo3 in accordance with attached drawing A008768-Z002 A

74 off HEADER OUTER BEND 51 OD x 3.2WT EN10216-2-16Mo3 in accordance with attached drawing A008768-Z002 A

 

All Finned Tubes to be supplied complete with material test certificates in accordance with EN10204 3.1.

All Finned Tubes to be stencilled with heat number.

All Finned Tubes to have Fins Spiral Fusion Welded 85 OD x 1.6THK x 15mm pitch

All Finned Tubes to be cut to length and ends weld prepared.

 

All Bends to be supplied complete with material test certificates in accordance with EN10204 3.1.

All Bends to be stencilled with heat number.

All Return End Inner Bends to be Normalised after bending. Signed Time-Temperature Charts and calibration certificates to be supplied as proof.

All Bends to be mandrel cold bent.

All Bends to be Wall Thinning 10% maximum and Ovality 17% maximum. Ultrasonic thickness test and dimensional reports to be supplied as proof.

Links to Lord Fin Tube:

请输入搜索关键字

确定